Pumping Units MDB-V greasing unit

These are the parts that deliver the pressure. The pumping element is driven by an excenter ring that is mounted directly on the pump shaft. The excenter ring pushes and pulls the piston to and fro. The piston isaccurately grinded and sipped onto the body with which a very tight fitting is obtained. When there's no dirt or other kind of pollution and there's no radial forces on the piston, the pumping element can function optimally for several years easily. This is due to the fact that all parts are lubricated very well by means of the grease or oil in the unit!

pistion versions : 6 or 8 mm
tube connection versions : 6, 8 10 or 12 mm

ArticlenumberArticlename
PE6/10pump element with 6 mm plunger and 10 mm wireconnection
PE6/12pump element with 6 mm plunger and 12 mm wireconnection
PE6/6pump element with 6 mm plunger and 6 mm wireconnection
PE6/8pump element with 6 mm plunger and 8 mm wireconnection
PE8/10pump element with 8 mm plunger and 10 mm wireconnection
PE8/12pump element with 8 mm plunger and 12 mm wireconnection
PE8/6pump element with 8 mm plunger and 6 mm wireconnection
PE8/8pump element with 8 mm plunger and 8 mm wireconnection