Technical data

Electrical grease lubricators model PEG-1N, PEG-2N, PEG-4N, PEG-8N in 24/12VDC

For a smooth operation the pump should be secured in a vertical position with two bolts, rings and nuts. For this reason a special mounting bracket has been placed on the pump casing.

 

amount of pump elements : 1, 2 or 3
output per stroke with fixed pump element : 0,16cc
output per stroke with adjustable pump element : 0,01 - 0,16cc
amount of pump rotations per minute : 15
suitable grease : all grease up to NLGI-class 2, provided that there are no solid particles(like graphite) in the grease.
maximum pressure : 250 bar
motor data : 24VDC - 30W - 1,5Amp / 12VDC - 40W - 3Amp
Size of the reservoir : 1, 2, 4 or 8 kg
working temperature : -30°C tot +80°C
socket outlets : G1/4"
   
   
Low-level switch :  with capacitive proximity switch
working voltage : 10 - 40 VDC (±10%)
maximum allowable current : 200 mA
Power consumption in rest : =<12mA
voltage drop : =< 2,8 VDC at maximum load
protected against : alternating polarity and short circuit
maximum switching frequency : 25Hz
contact : NO (normally open)
working temperature : -25°C tot +70°C
protection factor : IP67
cabel : 2 meters, 3x0,25mm2, grey PVC, oil resistant
licences : UL / CSA / CE