ATS Information page

ATS ElectroLuber
ATS Electro Luber


The ELECTROLUBER uses an electro-chemical reactor cell which converts electrical energy into safe, inert nitrogen gas. The gas is trapped in a hermetically sealed bellows type gas chamber. ATS Electro-Lube was the first company to use this self-contained automatic lubrication technology; as the gas is produced an internal pressure builds up in the bellows and is applied against the orange piston. The piston then forces the lubricant out of the cylinder and into the point of lubrication. The unit can empty between 15 days to 1 year depending on the setting of the simple userprogrammable DIP switch. The selection can be changed or turned off at any time.

ATS Ultimate Luber
ATS Ultimate Luber

The ULTIMATE LUBER is a powerful, motor-driven automatic lubricator which is refillable using standard grease guns. Its microprocessor controlled, energy efficient motor delivers grease to a fixed displacement pump which produces pressures up to 60 bar. This strength allows the ULTIMATE LUBER to drive lubricant through long feed lines and to cycle progressive distributors to feed several bearings consecutively. When a dispensing cycle is selected, the units will activate at programmed intervals. At each interval, the ULTIMATE LUBER dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the lubricant output.

ATS Titan CL and CLII

ATS Titan CL and CLII Luber

The TITAN CL LUBER is a powerful, motor-driven automatic lubricator which is built on the proven ULTIMATE LUBER technology. The TITAN CL LUBER is refillable by simply replacing a standard grease cartridge. Its microprocessor controlled, energy efficient motor delivers grease to a fixed displacement pump which produces pressures up to 60 bar. This strength allows the TITAN CL LUBER to drive lubricant through long feed lines and to cycle progressive distributors to feed several bearings consecutively. When a valid dispensing cycle is selected, the units will activate at programmed intervals. At each interval, the TITAN CL LUBER dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the lubricant output.

ATS Titan Oiler


ATS Titan Oiler 2000

The TITAN OILER 2000 is a powerful, motor-driven automatic lubricator which is built on the proven ULTIMATE LUBER technology. The TITAN OILER 2000 and its easily refillable, large capacity,1400cc (47 fl.oz.) tank is perfect for most industrial oiler applications where quality and reliability are needed. Its microprocessor controlled, energy efficient motor delivers oil to a fixed displacement pump which produces pressures up to 135 bar. This strength allows the TITAN OILER 2000 to drive oil through long feed lines and/or through an oil distribution system to feed several applications at the same time. When a valid dispensing cycle is selected, the units will activate at programmed intervals delivering 2cc's of oil per cycle. Neither temperature nor altitude will affect the output.

ATS Jack Luber ATS Jack Luber

The JACK LUBER is the most versatile product in the ATS product line. It's built on the proven ULTIMATE LUBER technology incorporating the JACK SCREW mechanism. Together, you know it's powerful! The JACK LUBER has a replaceable, one-time use cartridge that changes out in seconds! The drive unit for the JACK LUBER is pure ULTIMATE power and runs off the ATS battery pack or with a direct AC/DC adaptor (optional). Producing over 200 psi, the JACK LUBER is capable of heavy duty applications running long lines; even through a 2 port distribution block. The JACK LUBER is tough, reliable and easy to work with. The JACK LUBER saves time, money and gives you the performance you need and trust from ATS!

ATS Accessoires


ATS Accessories

Various high quality Accessories and Replacement parts are available from the factory.